Effect of EDTA with porous balloon on calcified lesion: An atherosclerotic cadaver study.

BACKGROUND: Ethylene diamine tetra-acetic acid (EDTA) is a chelating agent used to dissolve calcium deposits but evidence in decalcifying atherosclerotic lesions is limited. AIMS: We assessed the feasibility and efficacy of EDTA delivered via porous balloon to target calcified lesions in cadaveric below-the-knee (BTK) arteries. METHODS: Using porcine carotid arteries, EDTA concentration was measured in the arterial wall and outside the artery at the 0-, 0.5-, 4-, and 24-h circulation after the injection through a porous balloon. In cadaver BTK samples, the proximal and distal anterior tibial artery (ATA) and distal posterior tibial artery (PTA) were studied. EDTA-2Na/H2O or EDTA-3Na/H2O were administrated using a porous balloon, then circulated for 6 h for EDTA-3Na/H2O and 24 h for EDTA-2Na/H2O and EDTA-3Na/H2O. Micro-CT imaging of the artery segments before and after the circulation and cross-sectional analyses were performed to evaluate calcium burden. RESULTS: In the porcine carotid study, EDTA was delivered through a porous balloon present in the arterial wall and was retained there for 24 h. In BTK arteries, cross-sectional analyses of micro-CT revealed a significant decrease in the calcium area in the distal ATA segment under 24-h circulation with EDTA-2Na/H2O and in the distal ATA segment under 24-h circulation with EDTA-3Na/H2O. The proximal ATA segment under 6-h circulation with EDTA-3Na/H2O showed no significant change in any parameters of calcium CONCLUSION: EDTA-3Na/H2O or EDTA-2Na/H2O with longer circulation times resulted in greater calcium reduction in atherosclerotic lesion. EDTA may have a potential therapeutic option for the treatment of atherosclerotic calcified lesions.

Integration of 3D-printed middle ear models and middle ear prostheses in otosurgical training.

BACKGROUND: In otosurgical training, cadaveric temporal bones are primarily used to provide a realistic tactile experience. However, using cadaveric temporal bones is challenging due to their limited availability, high cost, and potential for infection. Utilizing current three-dimensional (3D) technologies could overcome the limitations associated with cadaveric bones. This study focused on how a 3D-printed middle ear model can be used in otosurgical training. METHODS: A cadaveric temporal bone was imaged using microcomputed tomography (micro-CT) to generate a 3D model of the middle ear. The final model was printed from transparent photopolymers using a laser-based 3D printer (vat photopolymerization), yielding a 3D-printed phantom of the external ear canal and middle ear. The feasibility of this phantom for otosurgical training was evaluated through an ossiculoplasty simulation involving ten otosurgeons and ten otolaryngology-head and neck surgery (ORL-HNS) residents. The participants were tasked with drilling, scooping, and placing a 3D-printed partial ossicular replacement prosthesis (PORP). Following the simulation, a questionnaire was used to collect the participants' opinions and feedback. RESULTS: A transparent photopolymer was deemed suitable for both the middle ear phantom and PORP. The printing procedure was precise, and the anatomical landmarks were recognizable. Based on the evaluations, the phantom had realistic maneuverability, although the haptic feedback during drilling and scooping received some criticism from ORL-HNS residents. Both otosurgeons and ORL-HNS residents were optimistic about the application of these 3D-printed models as training tools. CONCLUSIONS: The 3D-printed middle ear phantom and PORP used in this study can be used for low-threshold training in the future. The integration of 3D-printed models in conventional otosurgical training holds significant promise.

[Microanatomical Investigation of the Subtemporal Transtentorial Approach]. / é¢žä¸‹ç»å°è„‘å¹•å ¥è·¯çš„æ˜¾å¾®è§£å‰–å­¦ç ”ç©¶.

Objective: To study the microanatomic structure of the subtemporal transtentorial approach to the lateral side of the brainstem, and to provide anatomical information that will assist clinicians to perform surgeries on the lateral, circumferential, and petroclival regions of the brainstem. Methods: Anatomical investigations were conducted on 8 cadaveric head specimens (16 sides) using the infratemporal transtentorial approach. The heads were tilted to one side, with the zygomatic arch at its highest point. Then, a horseshoe incision was made above the auricle. The incision extended from the midpoint of the zygomatic arch to one third of the mesolateral length of the transverse sinus, with the flap turned towards the temporal part. After removing the bone, the arachnoid and the soft meninges were carefully stripped under the microscope. The exposure range of the surgical approach was observed and the positional relationships of relevant nerves and blood vessels in the approach were clarified. Important structures were photographed and the relevant parameters were measured. Results: The upper edge of the zygomatic arch root could be used to accurately locate the base of the middle cranial fossa. The average distances of the star point to the apex of mastoid, the star point to the superior ridge of external auditory canal, the anterior angle of parietomastoid suture to the superior ridge of external auditory canal, and the anterior angle of parietomastoid suture to the star point of the 10 adult skull specimens were 47.23 mm, 45.27 mm, 26.16 mm, and 23.08 mm, respectively. The subtemporal approach could fully expose the area from as high as the posterior clinoid process to as low as the petrous ridge and the arcuate protuberance after cutting through the cerebellar tentorium. The approach makes it possible to handle lesions on the ventral or lateral sides of the middle clivus, the cistern ambiens, the midbrain, midbrain, and pons. In addition, the approach can significantly expand the exposure area of the upper part of the tentorium cerebelli through cheekbone excision and expand the exposure range of the lower part of the tentorium cerebelli through rock bone grinding technology. The total length of the trochlear nerve, distance of the trochlear nerve to the tentorial edge of cerebellum, length of its shape in the tentorial mezzanine, and its lower part of entering into the tentorium cerebelli to the petrosal ridge were (16.95±4.74) mm, (1.27±0.73) mm, (5.72±1.37) mm, and (4.51±0.39) mm, respectively. The cerebellar tentorium could be safely opened through the posterior clinoid process or arcuate protrusion for localization. The oculomotor nerve could serve as an anatomical landmark to locate the posterior cerebral artery and superior cerebellar artery. Conclusion: Through microanatomic investigation, the exposure range and intraoperative difficulties of the infratemporal transtentorial approach can be clarified, which facilitates clinicians to accurately and safely plan surgical methods and reduce surgical complications.

Is the collateral circulation pattern in the hard palate affected by cleft deformity?

OBJECTIVES: To evaluate the influence of collateral vascularization on surgical cleft palate closure and deformities. MATERIALS AND METHODS: Corrosion casting was performed using red-colored acrylic resin in twelve fresh adult cadavers with a normal hard palate. Additionally, white-colored barium sulfate was injected into a fetus with a unilateral complete cleft palate, and layer-by-layer tissue dissection was performed. Both substances were injected into the external carotid arteries. Corrosion casting involved dissolving the soft and hard tissues of the orofacial area utilizing an enzymatic solution. RESULTS: In normal palates, bilateral intraosseous infraorbital arteries formed a network in the premaxilla with the intraosseous nasopalatine- and greater palatine arteries (GPAs). The perforating GPAs anastomosed with the sphenopalatine artery sub-branches. Bilateral extraosseous GPA anastomoses penetrated the median palatine suture. Complex vascularization in the retrotuberal area was detected. In the cleft zone, anastomoses were omitted, whereas in the non-cleft zone, enlarged GPAs were distributed along the cleft edges and followed the anatomical course anteriorly to initiate the network with facial artery sub-branches. CONCLUSIONS: The anatomical subunits of the palate exhibited distinct anastomosis patterns. Despite omitted anastomoses with collateral circulation in the cleft zone, arteries maintained their anatomical pattern as seen in the normal specimen in the non-cleft zone. CLINICAL RELEVANCE: Based on the findings in normal- and cleft palates, surgeons may expect developed anastomosis patterns in the non-cleft zone. Due to the lack of microcirculation in the cleft zone, the existent anastomoses should be maintained as much as possible by the surgical technique. This applies anteriorly in the incisive canal territory, alveolar ridges, and posteriorly in the retrotuberal area.

Quantifying Bone and Skin Movement in the Residual Limb-Socket Interface of Individuals With Transtibial Limb Loss Using Dynamic Stereo X-Ray: Protocol for a Lower Limb Loss Cadaver and Clinical Study.

BACKGROUND: Relative motion between the residual limb and socket in individuals with transtibial limb loss can lead to substantial consequences that limit mobility. Although assessments of the relative motion between the residual limb and socket have been performed, there remains a substantial gap in understanding the complex mechanics of the residual limb-socket interface during dynamic activities that limits the ability to improve socket design. However, dynamic stereo x-ray (DSX) is an advanced imaging technology that can quantify 3D bone movement and skin deformation inside a socket during dynamic activities. OBJECTIVE: This study aims to develop analytical tools using DSX to quantify the dynamic, in vivo kinematics between the residual limb and socket and the mechanism of residual tissue deformation. METHODS: A lower limb cadaver study will first be performed to optimize the placement of an array of radiopaque beads and markers on the socket, liner, and skin to simultaneously assess dynamic tibial movement and residual tissue and liner deformation. Five cadaver limbs will be used in an iterative process to develop an optimal marker setup. Stance phase gait will be simulated during each session to induce bone movement and skin and liner deformation. The number, shape, size, and placement of each marker will be evaluated after each session to refine the marker set. Once an optimal marker setup is identified, 21 participants with transtibial limb loss will be fitted with a socket capable of being suspended via both elevated vacuum and traditional suction. Participants will undergo a 4-week acclimation period and then be tested in the DSX system to track tibial, skin, and liner motion under both suspension techniques during 3 activities: treadmill walking at a self-selected speed, at a walking speed 10% faster, and during a step-down movement. The performance of the 2 suspension techniques will be evaluated by quantifying the 3D bone movement of the residual tibia with respect to the socket and quantifying liner and skin deformation at the socket-residuum interface. RESULTS: This study was funded in October 2021. Cadaver testing began in January 2023. Enrollment began in February 2024. Data collection is expected to conclude in December 2025. The initial dissemination of results is expected in November 2026. CONCLUSIONS: The successful completion of this study will help develop analytical methods for the accurate assessment of residual limb-socket motion. The results will significantly advance the understanding of the complex biomechanical interactions between the residual limb and the socket, which can aid in evidence-based clinical practice and socket prescription guidelines. This critical foundational information can aid in the development of future socket technology that has the potential to reduce secondary comorbidities that result from complications of poor prosthesis load transmission. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/57329.

A quantitative comparative surgical analysis of the endoscopic transorbital approach and frontotemporal-orbitozygomatic approach for extradural exposure of the cavernous sinus.

OBJECTIVE: Recently, the endoscopic superior eyelid transorbital approach (SETA) has emerged as a potential alternative to access the cavernous sinus (CS). Several previous studies have attempted to quantitatively compare the traditional open anterolateral skull base approaches with transorbital exposure; however, these comparisons have been limited to the area of exposure provided by the bone opening and trajectory, and fail to account for the main avenues of exposure provided by subsequent requisite surgical maneuvers. The authors quantitatively compare the surgical access provided by the frontotemporal-orbitozygomatic (FTOZ) approach and the SETA following applicable periclinoid surgical maneuvers, evaluate the surgical exposure of key structures in each, and discuss optimal approach selection. METHODS: SETA and FTOZ approaches were performed with subsequent applicable surgical maneuvers on 8 cadaveric heads. The lengths of exposure of cranial nerves (CNs) II-VI and the cavernous internal carotid artery; the areas of the space accessed within the supratrochlear, infratrochlear, and supramaxillary (anteromedial) triangles; the total area of exposure; and the angles of attack were measured and compared. RESULTS: Exposure of the extradural CS was comparable between approaches, whereas access was significantly greater in the FTOZ approach compared with the SETA. The lengths of extradural exposure of CN III, V1, V2, and V3 were comparable between approaches. The FTOZ approach provided marginally increased exposure of CNs IV (20.9 ± 2.36 mm vs 13.4 ± 3.97 mm, p = 0.023) and VI (14.1 ± 2.44 mm vs 9.22 ± 3.45 mm, p = 0.066). The FTOZ also provided significantly larger vertical (44.5° ± 6.15° vs 18.4° ± 1.65°, p = 0.002) and horizontal (41.5° ± 5.40° vs 15.3° ± 5.06°, p < 0.001) angles of attack, and thus significantly greater surgical freedom, and provided significantly greater access to the supratrochlear (p = 0.021) and infratrochlear (p = 0.007) triangles, and significantly greater exposure of the cavernous internal carotid artery (17.2 ± 1.70 mm vs 8.05 ± 2.37 mm, p = 0.001). Total area of exposure was also significantly larger in the FTOZ, which provided wide access to the lateral wall of the CS as well as the possibility for intradural access. CONCLUSIONS: This is the first study to quantitatively identify the relative advantages of the FTOZ and transorbital approaches at the target region following requisite surgical maneuvers. Understanding these data will aid in selecting an optimal approach and maneuver set based on target lesion size and location.

Transpalpebral mini-orbitozygomatic approach for nonvascular skull base lesions: a single neurosurgeon's experience.

OBJECTIVE: The authors aim to describe the advantages, utility, and disadvantages of the transpalpebral mini-orbitozygomatic (MOZ) approach for tumors of the lateral and superior orbit, orbital apex, anterior clinoid, anterior cranial fossa, middle cranial fossa, and parasellar region. METHODS: The surgical approach from skin incision to closure is described while highlighting key technical and anatomical considerations, and cadaveric dissection demonstrates the surgical steps and focuses on important anatomy. Intraoperative images were included to supplement the cadaveric dissection. A retrospective review of adults who had undergone the MOZ approach for nonvascular pathology performed by a single neurosurgeon from 2017 to 2023 was included in this institutional review board-approved study. Descriptive statistics was used to summarize the data. Four representative cases were included to demonstrate the utility of the MOZ approach. RESULTS: The study included 65 patients (46 female, 19 male), average age 54.84 years, who had undergone transpalpebral MOZ surgery. Presenting symptoms included visual changes (53.8% of cases), vision loss (23.1%), diplopia (21.8%), and proptosis (13.8%). The optic nerve and optic chiasm were involved in 32.3% and 10.8% of cases, respectively. The most common pathology was meningioma (81.5% of cases), and gross-total resection was achieved in 50% of all cases. Major complications included an infection and a carotid injury. Improvement of preoperative symptoms was reported in 92.2% of cases. Visual acuity improved in 12 patients. The mean follow-up was 8.57 ± 8.45 months. CONCLUSIONS: The MOZ approach is safe and durable. The transpalpebral incision provides better cosmesis and functional outcomes than those of standard anterolateral approaches to the skull base. Careful consideration of the limits of the approach is paramount to appropriate application on a case-by-case basis. Further quantitative anatomical studies can help to define and compare the utility of the approach to open cranio-orbital and endoscopic transorbital approaches.

Open-door extended endoscopic transorbital technique to the paramedian anterior and middle cranial fossae: technical notes, anatomomorphometric quantitative analysis, and illustrative case.

OBJECTIVE: The superior eyelid endoscopic transorbital approach (SETOA) provides a direct and short minimally invasive route to the anterior and middle skull base. Nevertheless, it uses a narrow corridor that limits its angles of attack. The aim of this study was to evaluate the feasibility and potential benefits of an "extended" conservative variant of the "standard" endoscopic transorbital approach-termed "open-door"-to enhance the exposure of lesions affecting the paramedian aspect of the anterior and middle cranial fossae. METHODS: First, the authors described the technical nuances of the open-door extended transorbital approach (ODETA). Next, they documented its morphometric advantages over standard SETOA. Finally, they provided a clinical-anatomical application to demonstrate enhanced exposure and better angles of attack to treat lesions occupying the paramedian anterior and middle cranial fossae. Five adult cadaveric specimens (10 sides) initially underwent standard SETOA and then extended open-door SETOA (ODETA to the paramedian anterior and middle fossae). The adjunct of hinge-orbitotomy, through three surgical steps and straddling the frontozygomatic suture, converted conventional SETOA to its extended open-door variant. CT scans were performed before dissection and uploaded to the neuronavigation system for quantitative analysis. The angles of attack on the axial plane that addressed four key landmarks, namely the tip of the anterior clinoid process (ACP), foramen rotundum (FR), foramen ovale (FO), and trigeminal impression (TI), were calculated for both operative techniques and compared. RESULTS: Hinge-orbitotomy of the extended open-door SETOA resulted in several surgical, functional, and esthetic advantages: it provided wider axial angles of attack for each of the target points, with a gain angle of 26.68° ± 1.31° for addressing the ACP (p < 0.001), 29.50° ± 2.46° for addressing the FR (p < 0.001), 19.86° ± 1.98° for addressing the FO (p < 0.001), and 17.44° ± 2.21° for addressing the lateral aspect of the TI (p < 0.001), while hiding the skin scar, avoiding temporalis muscle dissection, preserving flap vascularization, and decreasing the rate of bone infection and degree of orbital content retraction. CONCLUSIONS: The extended open-door technique may be specifically suited for selected patients affected by paramedian anterior and middle fossae lesions, with prevalent anteromedial extension toward the anterior clinoid, the foremost compartment of the cavernous sinus and FR and not completely controlled with the pure endoscopic transorbital approach.

Anterolateral keyhole transorbital routes to the skull base: a comparative anatomical study.

OBJECTIVE: Although keyhole transorbital approaches are gaining traction, their indications have not been adequately studied comparatively. In this study the authors have defined them also as transwing approaches-meaning that they use the different facies of the sphenoid wing for cranial entry-and sought to compare the four major ones: 1) lateral orbitocraniotomy through a lateral canthal incision (LatOrb); 2) modified orbitozygomatic approach through a palpebral incision (ModOzPalp); 3) modified orbitozygomatic approach through an eyebrow incision (ModOzEyB); and 4) supraorbital craniotomy through an eyebrow incision (SupraOrb), coupled with its expanded version (SupraTransOrb). METHODS: Cadaveric dissections were performed at the neuroanatomy lab. To delineate the skull base exposure, four formalin-fixed heads were used, with two sides dedicated to each approach. The outer limits were assessed via image guidance and were mapped and illustrated accordingly. A fifth head was dissected purely endoscopically, just to facilitate an overview of the transwing concept. Qualitative features were also rigorously examined. RESULTS: The LatOrb proves to be more versatile in the middle cranial fossa (MCF), whereas the anterior cranial fossa (ACF) exposure is limited to a small area above the sphenoid ridge. An anterior clinoidectomy is possible; however, the exposure of the roof of the optic canal is suboptimal. The ModOzPalp adequately exposes both the ACF and MCF. Its lateral trajectory allows the inferior to superior view, yet there is restricted access to the medial anterior skull base (olfactory groove). The ModOzEyB also provides extensive exposure of the ACF and MCF, but has a more superior to inferior trajectory compared to the ModOzPalp, making it more appropriate for pathology reaching the medial anterior skull base or even the contralateral side. The anterior clinoidectomy is performed with improved visualization of the optic canal. The SupraOrb provides mainly anterior cranial base exposure, with minimal middle fossa. An anterior clinoidectomy can be performed, but without any direct observation of the superior orbital fissure. Some MCF access can be accomplished if the lateral sphenoid wing is drilled inferiorly, leading to its highly versatile variant, the SupraTransOrb. CONCLUSIONS: All the aforementioned approaches use the sphenoid wing as skull base corridor from a specific orientation point; hence these are designated as transwing approaches. Their peculiarities mandate careful case selection for the effective and safe completion of the surgical goals.

360° around the orbit: key surgical anatomy of the microsurgical and endoscopic cranio-orbital and orbitocranial approaches.

OBJECTIVE: Several pathologies either invade or arise within the orbit. These include meningiomas, schwannomas, and cavernous hemangiomas among others. Although several studies describing various approaches to the orbit are available, no study describes all cranio-orbital and orbitocranial approaches with clear, surgically oriented anatomical descriptions. As such, this study aimed to provide a comprehensive guide to the microsurgical and endoscopic approaches to and through the orbit. METHODS: Six formalin-fixed, latex-injected cadaveric head specimens were dissected in the surgical anatomy laboratory at the authors' institution. In each specimen, the following approaches were modularly performed: endoscopic transorbital approaches (ETOAs), including a lateral transorbital approach and a superior eyelid crease approach; endoscopic endonasal approaches (EEAs), including those to the medial orbit and optic canal; and transcranial approaches, including a supraorbital approach, a fronto-orbital approach, and a 3-piece orbito-zygomatic approach. Each pertinent step was 3D photograph-documented with macroscopic and endoscopic techniques as previously described. RESULTS: Endoscopic endonasal approaches to the orbit afforded excellent access to the medial orbit and medial optic canal. Regarding ETOAs, the lateral transorbital approach afforded excellent access to the floor of the middle fossa and, once the lateral orbital rim was removed, the cavernous sinus could be dissected and the petrous apex drilled. The superior eyelid approach provides excellent access to the anterior cranial fossa just superior to the orbit, as well as the dura of the lesser wing of the sphenoid. Craniotomy-based approaches provided excellent access to the anterior and middle cranial fossa and the cavernous sinus, except the supraorbital approach had limited access to the middle fossa. CONCLUSIONS: This study outlines the essential surgical steps for major cranio-orbital and orbitocranial approaches. Endoscopic endonasal approaches offer direct medial access, potentially providing bilateral exposure to optic canals. ETOAs serve as both orbital access and as a corridor to surrounding regions. Cranio-orbital approaches follow a lateral-to-medial, superior-to-inferior trajectory, progressively allowing removal of protective bony structures for proportional orbit access.

Endoscopic precaruncular medial transorbital and endonasal multiport approaches to the contralateral skull base: a clinicoanatomical study.

OBJECTIVE: Minimally invasive endoscopic endonasal multiport approaches create additional visualization angles to treat skull base pathologies. The sublabial contralateral transmaxillary (CTM) approach and superior eyelid lateral transorbital approach, frequently used nowadays, have been referred to as the "third port" when used alongside the endoscopic endonasal approach (EEA). The endoscopic precaruncular contralateral medial transorbital (cMTO) corridor, on the other hand, is an underrecognized but unique port that has been used to repair CSF rhinorrhea originating from the lateral sphenoid sinus recess. However, no anatomical feasibility studies or clinical experience exists to assess its benefits and demonstrate its potential role in multiport endoscopic access to the other contralateral skull base areas. In this study, the authors explored the application and potential utility of multiport EEA combined with the endoscopic cMTO approach (EEA/cMTO) to three target areas of the contralateral skull base: lateral recess of sphenoid sinus (LRSS), petrous apex (PA) and petroclival region, and retrocarotid clinoidocavernous space (CCS). METHODS: Ten cadaveric specimens (20 sides) were dissected bilaterally under stereotactic navigation guidance to access contralateral LRSS via EEA/cMTO. The PA and petroclival region and retrocarotid CCS were exposed via EEA alone, EEA/cMTO, and EEA combined with the sublabial CTM approach (EEA/CTM). Qualitative and quantitative assessments, including working distance and visualization angle to the PA, were recorded. Clinical application of EEA/cMTO is demonstrated in a lateral sphenoid sinus CSF leak repair. RESULTS: During the qualitative assessment, multiport EEA/cMTO provides superior visualization from a high vantage point and better instrument maneuverability than multiport EEA/CTM for the PA and retrocarotid CCS, while maintaining a similar lateral trajectory. The cMTO approach has significantly shorter working distances to all three target areas compared with the CTM approach and EEA. The mean distances to the LRSS, PA, and retrocarotid CCS were 50.69 ± 4.28 mm (p < 0.05), 67.11 ± 5.05 mm (p < 0.001), and 50.32 ± 3.6 mm (p < 0.001), respectively. The mean visualization angles to the PA obtained by multiport EEA/cMTO and EEA/CTM were 28.4° ± 3.27° and 24.42° ± 5.02° (p < 0.005), respectively. CONCLUSIONS: Multiport EEA/cMTO to the contralateral LRSS offers the advantage of preserving the pterygopalatine fossa contents and the vidian nerve, which are frequently sacrificed during a transpterygoid approach. This approach also offers superior visualization and better instrument maneuverability compared with EEA/CTM for targeting the petroclival region and retrocarotid CCS.

[Advances in clinical anatomy of the transnasal approaches to the parapharyngeal segment of the internal carotid artery].

The intracranial segment of the internal carotid artery located inside the skeleton structure of skull base or inside the skull has clear anatomical landmarks and fixed anatomical structure. However, the parapharyngeal segment of the internal carotid artery located outside the cranial is surrounded by soft tissues, lacks clear and recognizable anatomical landmarks and sometimes has anatomical variation, which is closely related to transnasal endoscopic surgery. Intraoperative accidental injury can lead to serious complications or even death. Currently, clinical anatomical studies related to the parapharyngeal segment of the internal carotid artery under transnasal endoscopic surgery mainly focus on its anatomical variation and anatomical landmarks. This article reviews on these two aspects in order to provide anatomical reference for surgeons to reduce surgical risks during transnasal endoscopic surgery.

Gross, organoleptic and histologic assessment of cadaveric equine heads preserved using chemical methods for veterinary surgical teaching.

BACKGROUND: Preservation of biological tissues has been used since ancient times. Regardless of the method employed, tissue preservation is thought to be a vital step in veterinary surgery teaching and learning. OBJECTIVES: This study was designed to determine the usability of chemically preserved cadaveric equine heads for surgical teaching in veterinary medicine. METHODS: Six cadaveric equine heads were collected immediately after death or euthanasia and frozen until fixation. Fixation was achieved by using a hypertonic solution consisting of sodium chloride, sodium nitrite and sodium nitrate, and an alcoholic solution containing ethanol and glycerin. Chemically preserved specimens were stored at low temperatures (2°C to 6°C) in a conventional refrigerator. The specimens were submitted to gross and organoleptic assessment right after fixative solution injection (D0) and within 10, 20, and 30 days of fixation (D10, D20, and D30, respectively). Samples of tissue from skin, tongue, oral vestibule, and masseter muscle were collected for histological evaluation at the same time points. RESULTS: Physical and organoleptic assessments revealed excellent specimen quality (mean scores higher than 4 on a 5-point scale) in most cases. In some specimens, lower scores (3) were assigned to the range of mouth opening, particularly on D0 and D10. A reduced the range of mouth opening may be a limiting factor in teaching activities involving structures located in the oral cavity. CONCLUSIONS: The excellent physical, histologic, and organoleptic characteristics of the specimens in this sample support their usability in teaching within the time frame considered. Appropriate physical and organoleptic characteristics (color, texture, odor, and flexibility) of the specimens in this study support the use of the method described for preparation of reusable anatomical specimens.

Morphology of the aortic arch branching pattern in raccoon dogs (Nyctereutes procyonoides, Gray, 1834).

BACKGROUND: Aortic arch (AA) branching patterns vary among different mammalian species. Most previous studies have focused on dogs, whereas those on raccoon dogs remain unexplored. OBJECTIVES: The objective of this study was to describe the AA branching pattern in raccoon dogs and compare their morphological features with those of other carnivores. METHODS: We prepared silicone cast specimens from a total of 36 raccoon dog carcasses via retrograde injection through the abdominal aorta. The brachiocephalic trunk (BCT) branching patterns were classified based on the relationship between the left and right common carotid arteries. The subclavian artery (SB) branching pattern was examined based on the order of the four major branches: the vertebral artery (VT), costocervical trunk (CCT), superficial cervical artery (SC), and internal thoracic artery (IT). RESULTS: In most cases (88.6%), the BCT branched off from the left common carotid artery and terminated in the right common carotid and right subclavian arteries. In the remaining cases (11.4%), the BCT formed a bicarotid trunk. The SB exhibited various branching patterns, with 26 observed types. Based on the branching order of the four major branches, we identified the main branching pattern, in which the VT branched first (98.6%), the CCT branched second (81.9%), the SC branched third (62.5%), and the IT branched fourth (52.8%). CONCLUSIONS: The AA branching pattern in raccoon dogs exhibited various branching patterns with both similarities and differences compared to other carnivores.

Toward an optimal cadaveric brain model for neurosurgical education: assessment of preservation, parenchyma, vascular injection, and imaging.

OBJECTIVE: We assessed types of cadaveric head and brain tissue specimen preparations that are used in a high throughput neurosurgical research laboratory to determine optimal preparation methods for neurosurgical anatomical research, education, and training. METHODS: Cadaveric specimens (N = 112) prepared using different preservation and vascular injection methods were imaged, dissected, and graded by 11 neurosurgeons using a 21-point scale. We assessed the quality of tissue and preservation in both the anterior and posterior circulations. Tissue quality was evaluated using a 9-point magnetic resonance imaging (MRI) scale. RESULTS: Formalin-fixed specimens yielded the highest scores for assessment (mean ± SD [17.0 ± 2.8]) vs. formalin-flushed (17.0 ± 3.6) and MRI (6.9 ± 2.0). Cadaver assessment and MRI scores were positively correlated (P < 0.001, R2 0.60). Analysis showed significant associations between cadaver assessment scores and specific variables: nonformalin fixation (ß = -3.3), preservation within ≤72 h of death (ß = 1.8), and MRI quality score (ß = 0.7). Formalin-fixed specimens exhibited greater hardness than formalin-flushed and nonformalin-fixed specimens (P ≤ 0.006). Neurosurgeons preferred formalin-flushed specimens injected with colored latex. CONCLUSION: For better-quality specimens for neurosurgical education and training, formalin preservation within ≤72 h of death was preferable, as was injection with colored latex. Formalin-flushed specimens more closely resembled live brain parenchyma. Assessment scores were lower for preparation techniques performed > 72 h postmortem and for nonformalin preservation solutions. The positive correlation between cadaver assessment scores and our novel MRI score indicates that donation organizations and institutional buyers should incorporate MRI as a screening tool for the selection of high-quality specimens.

Impact of acquisition volume on cone beam computed tomography imaging of marginal bone: an ex vivo study.

OBJECTIVE: The current study explores whether there is a clinically relevant distinction in the measurement of marginal bone loss when comparing high-dose (HD) versus low-dose (LD) cone beam computed tomography (CBCT) protocols in small and large acquisition volumes.  Material and Methods: CBCTs of four human cadaveric preparates were taken in HD and LD mode in two different fields of view 8 × 8 cm2 (LV) and 5 × 5 cm2 (SV). In total, 43 sites of 15 teeth were randomly chosen, and marginal bone loss was measured twice in all protocols at 43 sites of 15 teeth by one calibrated investigator. Bland-Altman plots and Lin's concordance correlation coefficient (CCC) were calculated to assess the extent of agreement of the measurements. Additionally, the rater scored the certainty in each of the measurements. RESULTS: For HD-CBCT CCC of measurements obtained using SV versus LV was 0.991. CCC of measurements obtained using SV versus LV of LD-CBCT was 0.963. Both CCC values indicated excellent agreement between the two volumes in both protocols.  CCC also indicated high intramodality correlation between HD-CBCT and LD-CBCT independent of the acquisition volume (0.963 - 0.992). Bland-Altman plots also indicated no substantial differences. Results of certainty scoring showed significant differences (p = 0.004 (LV), p < 0.001(SV)) between the LD and HD-CBCT. CONCLUSIONS: Accuracy of measurements of bone loss shows no clinical noticeable effects depending on the CBCT volume in this ex vivo study. There appears to be no relevant advantage of SV over LV, neither in HD-CBCT nor in LD-CBCT and additionally no relevant advantage of HD versus LD in visualizing marginal bone loss.

Does a novel 3D printed individualized guiding template based on cutaneous fiducial markers contribute to accurate percutaneous insertion of pelvic screws? A preliminary phantom and cadaver study.

BACKGROUND: Most 3D-printed guiding templates require dissection of soft tissues to match the corresponding surfaces of the guiding templates. This study sought to explore the accuracy and acceptability of the novel 3D printed individualized guiding templates based on cutaneous fiducial markers in minimally invasive screw placement for pelvic fractures. METHODS: The printed template was tested on five high-fidelity biomimetic phantom models of the bony pelvis and its surrounding soft tissues as well as on two fresh frozen cadavers. Four cutaneous fiducial markers were transfixed on each phantom model prior to performing CT scans to reconstruct their 3D models. Personalized templates for guiding screw insertion were designed based on the positions of the fiducial markers and virtually planned target screw channels after scanning, followed by 3D printing of the guide. Phase 1 consisted of five expert surgeons inserting one anterograde supra-pubic screw and one sacroiliac screw percutaneously into each phantom model using the 3D-printed guide. The deviation of screw positions between the pre-operative planned and post-operative actual ones was measured after registering their 3D modelling. A Likert scale questionnaire was completed by the expert surgeons to assess their satisfaction and acceptability with the guiding template. Phase 2 consisted of repeating the same procedures on the fresh frozen cadavers in order to demonstrate face, content and concurrent validity. RESULTS: In Phase 1, all ten screws were successfully implanted with the assistance of the guiding template. Postoperative CT scans confirmed that all screws were safely positioned within the bony pelvic channels without breaching the far cortex. The mean longitudinal deviation at the bony entry point and screw tip between the pre-operative planned and post-operative actual screw paths were 2.83 ± 0.60 mm and 3.12 ± 0.81 mm respectively, with a mean angular deviation of 1.25 ± 0.41°. Results from the Likert questionnaire indicated a high level of satisfaction for using the guiding template among surgeons. In Phase 2, results were similar to those in Phase 1. CONCLUSIONS: The 3D-printed guiding template based on cutaneous fiducial markers shows potential for assisting in the accurate insertion of percutaneous screws in the pelvis.

Anatomical variants of the intercostobrachial nerve and its preservation during surgery, a systematic review and meta-analysis.

BACKGROUND: The anatomic variants of the intercostobrachial nerve (ICBN) represent a potential risk of injuries during surgical procedure such as axillary lymph node dissection and sentinel lymph node biopsy in breast cancer and melanoma patients. The aim of this systematic review and meta-analysis was to investigate the different origins and branching patterns of the intercostobrachial nerve also providing an analysis of the prevalence, through the analysis of the literature available up to September 2023. MATERIALS AND METHODS: The protocol for this study was registered on PROSPERO (ID: CRD42023447932), an international prospective database for reviews. The PRISMA guideline was respected throughout the meta-analysis. A systematic literature search was performed using PubMed, Scopus and Web of Science. A search was performed in grey literature through google. RESULTS: We included a total of 23 articles (1,883 patients). The prevalence of the ICBN in the axillae was 98.94%. No significant differences in prevalence were observed during the analysis of geographic subgroups or by study type (cadaveric dissections and in intraoperative dissections). Only five studies of the 23 studies reported prevalence of less than 100%. Overall, the PPE was 99.2% with 95% Cis of 98.5% and 99.7%. As expected from the near constant variance estimates, the heterogeneity was low, I2 = 44.3% (95% CI 8.9%-65.9%), Q = 39.48, p = .012. When disaggregated by evaluation type, the difference in PPEs between evaluation types was negligible. For cadaveric dissection, the PPE was 99.7% (95% CI 99.1%-100.0%) compared to 99.0% (95% CI 98.1%-99.7%). CONCLUSIONS: The prevalence of ICBN variants was very high. The dissection of the ICBN during axillary lymph-node harvesting, increases the risk of sensory disturbance. The preservation of the ICBN does not modify the oncological radicality in axillary dissection for patients with cutaneous metastatic melanoma or breast cancer. Therefore, we recommend to operate on these patients in high volume center to reduce post-procedural pain and paresthesia associated with a lack of ICBN variants recognition.